The new Wotofo Profile RDTA is a perfect combination of the popular RDA and RTA, combining the advantages of the two. With a diameter of 25mm, made of high-quality stainless steel, and PCTG, the Wotofo Profile RDTA uses a very spacious pillarless deck and provides enough space to easily install a mesh coil or single/dual wire coil onto it. Whether you prefer wire coils or mesh coils, the Profile RDTA offers a smart design, with its smart postless clamping structure, you could easily drop two 3mm-ID wire coils onto the deck, or just a single 3.5mm-ID coil.
The Profile RDTA build deck can work with all Profile 1.5 RDA meshes, with better flavour production. Below the deck is a liquid glass tube with a capacity of 6.2ml, which is unbelievable.
The filling is done through a small opening on the build deck. The liquid is transferred from the storage tube to the build deck through the twisted four stainless steel wicks, which can effectively improve the transfer of juice from the bottom to the top. These 4 stainless steel wicks are rope-shaped and have a strong wicking ability, which can effectively absorb juice from the bottom of the tank along the length of the tank and deliver excellent saturation for the cotton.
In addition, Wotofo Profile RDTA has a multicolor 810 resin drip tip, and an exquisite metal decoration ring is installed on the bottom of the drip tip to make the appearance more vivid.
The Profile RDTA is very easy to be switched to an RDA. Find the RDA adapter in the package, detach the tank section, screw the adapter onto the deck bottom, and choose between the solid pin and the squonk pin according to your preference, then you get a whole new beast RDA.
Honeycomb airflow (honeycomb shape) can be adjusted as needed to ensure a perfect airflow and adjust vapour. The Profile RDTA honeycomb intake system is very easy to adjust, just rotate the top cap and it's all under your control! Wotofo Profile RDTA is available in six different colours.
Size: 25 x 52.7mm (not including 510 connection pin)
Drip Tip Size: 810
Supports both single mesh 'coils' (pieces) plus single or dual traditional coils
Compatible with up to 3mm diameter coils in dual coil mode
Fully compatible with Wotofo nexMesh for the Profile 1.5 RDA
Fillable via top cap and automatically feeds juice via stainless steel wicks
Much less wicking required than traditional RDTAs!
Brand new claptonised mesh pieces for truly amazing flavour and even contact area all round
RDA is modular to the RDTA section, and can be squonked in RDA mode
Three stage adjustable dotted honeycomb airflow
What's in the box
1 x Wotofo Profile RDTA
1 x piece of nexMESH Piece Clapton Ni80 + KA1 0.2 ohm
1 x piece of nexMESH Extreme KA1 0.16 ohm
1 x piece of nexMESH Turbo KA1 0.13 ohm
2 x Framed Staple Clapton Coils Ni80 0.33 ohm (per piece, ~0.16 ohm dual)
2 x 6mm Diameter Cotton Strips (for mesh pieces)
2 x 3mm Diameter Cotton Strips (for traditional coils)
6 x Stainless Steel Wicks: 4 pre-installed, 2 spares
1 x Coil Trimming Tool
1 x Mesh Bending Tool
1 x RDA Adapter
1 x Cross Head Screwdriver Allen Key
Spares Bag: o-rings, screws